# Copyright 1999-2005 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Id: /var/cvsroot/gentoo-src/portage/cnf/make.conf.ppc64,v 1.1.2.5 2005/04/13 15:28:38 jstubbs Exp $ # Contains local system settings for Portage system # Please review 'man make.conf' for more information. # Build-time functionality # ======================== # # The USE variable is used to enable optional build-time functionality. For # example, quite a few packages have optional X, gtk or GNOME functionality # that can only be enabled or disabled at compile-time. Gentoo Linux has a # very extensive set of USE variables described in our USE variable HOWTO at # http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=1 # # The available list of use flags with descriptions is in your portage tree. # Use 'less' to view them: --> less /usr/portage/profiles/use.desc <-- # # 'ufed' is an ncurses/dialog interface available in portage to make handling # useflags for you. 'emerge app-portage/ufed' # # Example: #USE="X gtk gnome -alsa" # Host Setting # ============ # # All PowerPC64 systems should use this host setting: CHOST="powerpc64-unknown-linux-gnu" # Host and optimization settings # ============================== # # For optimal performance, enable a CFLAGS setting appropriate for your CPU. # # Please note that if you experience strange issues with a package, it may be # due to gcc's optimizations interacting in a strange way. Please test the # package (and in some cases the libraries it uses) at default optimizations # before reporting errors to developers. # # -mtarget= for PowerPC64 systems instructs the gcc compiler that # it can use instruction scheduling specific for that type of processor # specified # # -mcpu= for PowerPC64 systems selects the type of processor you want # to optimize your code for. Code generated under those options will run best # on that processor. # # -mcpu= and -mtarget= should both be specified # # GCC 3.x supports many ppc64 processor types including: power3, power4, # 970 (aka G5), and power5. # # RS64 processors should specify power3. # # Additional options of interest: # # -maltivec enables optional altivec support and should be used # only for 970 processors. It also requires that you have # the alitvec option compiled into your kernel to take full advantage of this # feature. Note: you should also include -mabi=altivec flag if using this option. # # -O3 for the most part seems ok but should be used with caution as # for instance app-editors/vim has problems if it is used. -O2 is a # good selection. # #Example CFLAGS setting #CFLAGS="-O2 -pipe -mcpu=970 -mtarget=970 -maltivec -mabi=altivec" # #or # #CFLAGS="-O2 -pipe -mcpu=power3 -mtarget=power3" # # If you set a CFLAGS above, then this line will set your default C++ flags to # the same settings. #CXXFLAGS="${CFLAGS}" # Advanced Masking # ================ # # Gentoo is using a new masking system to allow for easier stability testing # on packages. KEYWORDS are used in ebuilds to mask and unmask packages based # on the platform they are set for. A special form has been added that # indicates packages and revisions that are expected to work, but have not yet # been approved for the stable set. '~arch' is a superset of 'arch' which # includes the unstable, in testing, packages. Users of the 'ppc64' architecture # would add '~ppc64' to ACCEPT_KEYWORDS to enable unstable/testing packages. # '~ppc64', '~sparc' are the unstable KEYWORDS for their respective platforms. # # Please note that this is not for development, alpha, beta, nor cvs release # packages. "Broken" packages will not be added to testing and should not be # requested to be added. Alternative routes are available to developers # for experimental packages, and it is at their discretion to use them. # # DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST. # IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS. # # Note: this really shouldn't be enabled until _AFTER_ you bootstrap and emerge # system. If you want the testing things update after these steps are completed. # #ACCEPT_KEYWORDS="ppc64" # Portage Directories # =================== # # Each of these settings controls an aspect of portage's storage and file # system usage. If you change any of these, be sure it is available when # you try to use portage. *** DO NOT INCLUDE A TRAILING "/" *** # # PORTAGE_TMPDIR is the location portage will use for compilations and # temporary storage of data. This can get VERY large depending upon # the application being installed. #PORTAGE_TMPDIR=/var/tmp # # PORTDIR is the location of the portage tree. This is the repository # for all profile information as well as all ebuilds. If you change # this, you must update your /etc/make.profile symlink accordingly. #PORTDIR=/usr/portage # # DISTDIR is where all of the source code tarballs will be placed for # emerges. The source code is maintained here unless you delete # it. The entire repository of tarballs for gentoo is 9G. This is # considerably more than any user will ever download. 2-3G is # a large DISTDIR. #DISTDIR=${PORTDIR}/distfiles # # PKGDIR is the location of binary packages that you can have created # with '--buildpkg' or '-b' while emerging a package. This can get # upto several hundred megs, or even a few gigs. #PKGDIR=${PORTDIR}/packages # # PORT_LOGDIR is the location where portage will store all the logs it # creates from each individual merge. They are stored as NNNN-$PF.log # in the directory specified. This is disabled until you enable it by # providing a directory. Permissions will be modified as needed IF the # directory exists, otherwise logging will be disabled. NNNN is the # increment at the time the log is created. Logs are thus sequential. #PORT_LOGDIR=/var/log/portage # # PORTDIR_OVERLAY is a directory where local ebuilds may be stored without # concern that they will be deleted by rsync updates. Default is not # defined. #PORTDIR_OVERLAY=/usr/local/portage # Fetching files # ============== # # If you need to set a proxy for wget or lukemftp, add the appropriate "export # ftp_proxy=" and "export http_proxy=" lines to /etc/profile if # all users on your system should use them. # # Portage uses wget by default. Here are some settings for some alternate # downloaders -- note that you need to merge these programs first before they # will be available. # # Default fetch command (5 tries, passive ftp for firewall compatibility) #FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp \${URI} -P \${DISTDIR}" #RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp \${URI} -P \${DISTDIR}" # # Using wget, ratelimiting downloads #FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}" #RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}" # # Lukemftp (BSD ftp): #FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}" #RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}" # # # Portage uses GENTOO_MIRRORS to specify mirrors to use for source retrieval. # The list is a space separated list which is read left to right. If you use # another mirror we highly recommend leaving the default mirror at the end of # the list so that portage will fall back to it if the files cannot be found # on your specified mirror. We _HIGHLY_ recommend that you change this setting # to a nearby mirror by merging and using the 'mirrorselect' tool. #GENTOO_MIRRORS=" http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo" # # Portage uses PORTAGE_BINHOST to specify mirrors for prebuilt-binary packages. # The list is a single entry specifying the full address of the directory # serving the tbz2's for your system. Running emerge with either '--getbinpkg' # or '--getbinpkgonly' will cause portage to retrieve the metadata from all # packages in the directory specified, and use that data to determine what will # be downloaded and merged. '-g' or '-gK' are the recommend parameters. Please # consult the man pages and 'emerge --help' for more information. For FTP, the # default connection is passive -- If you require an active connection, affix # an asterisk (*) to the end of the host:port string before the path. #PORTAGE_BINHOST="http://grp.mirror.site/gentoo/grp/1.4/i686/athlon-xp/" # This ftp connection is passive ftp. #PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site/pub/grp/i686/athlon-xp/" # This ftp connection is active ftp. #PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site:21*/pub/grp/i686/athlon-xp/" # Synchronizing Portage # ===================== # # Each of these settings affects how Gentoo synchronizes your Portage tree. # Synchronization is handled by rsync and these settings allow some control # over how it is done. # # # SYNC is the server used by rsync to retrieve a localized rsync mirror # rotation. This allows you to select servers that are geographically # close to you, yet still distribute the load over a number of servers. # Please do not single out specific rsync mirrors. Doing so places undue # stress on particular mirrors. Instead you may use one of the following # continent specific rotations: # # Default: "rsync://rsync.gentoo.org/gentoo-portage" # North America: "rsync://rsync.namerica.gentoo.org/gentoo-portage" # South America: "rsync://rsync.samerica.gentoo.org/gentoo-portage" # Europe: "rsync://rsync.europe.gentoo.org/gentoo-portage" # Asia: "rsync://rsync.asia.gentoo.org/gentoo-portage" # Australia: "rsync://rsync.au.gentoo.org/gentoo-portage" #SYNC="rsync://rsync.gentoo.org/gentoo-portage" # # RSYNC_RETRIES sets the number of times portage will attempt to retrieve # a current portage tree before it exits with an error. This allows # for a more successful retrieval without user intervention most times. #RSYNC_RETRIES="3" # # RSYNC_TIMEOUT sets the length of time rsync will wait before it times out # on a connection. Most users will benefit from this setting as it will # reduce the amount of 'dead air' they experience when they run across # the occasional, unreachable mirror. Dialup users might want to set this # value up around the 300 second mark. #RSYNC_TIMEOUT=180 # Advanced Features # ================= # # MAKEOPTS provides extra options that may be passed to 'make' when a # program is compiled. Presently the only use is for specifying # the number of parallel makes (-j) to perform. The suggested number # for parallel makes is CPUs+1. #MAKEOPTS="-j2" # # PORTAGE_NICENESS provides a default increment to emerge's niceness level. # Note: This is an increment. Running emerge in a niced environment will # reduce it further. Default is unset. #PORTAGE_NICENESS=3 # # PORTAGE_TMPFS is a location where portage may create temporary files. # If specified, portage will use this directory whenever possible # for all rapid operations such as lockfiles and transient data. # It is _highly_ recommended that this be a tmpfs or ramdisk. Do not # set this to anything that does not give a significant performance # enhancement and proper FS compliance for locks and read/write. # /dev/shm is a glibc mandated tmpfs, and should be a reasonable # setting for all linux kernel+glibc based systems. #PORTAGE_TMPFS="/dev/shm" # # FEATURES are settings that affect the functionality of portage. Most of # these settings are for developer use, but some are available to non- # developers as well. # # 'autoaddcvs' causes portage to automatically try to add files to cvs # that will have to be added later. Done at generation times # and only has an effect when 'cvs' is also set. # 'buildpkg' causes binary packages to be created of all packages that # are being merged. # 'ccache' enables ccache support via CC. # 'collision-protect' # prevents packages from overwriting files that are owned by # another package or by no package at all. # 'cvs' causes portage to enable all cvs features (commits, adds), # and to apply all USE flags in SRC_URI for digests -- for # developers only. # 'digest' causes digests to be generated for all packages being merged. # 'distcc' enables distcc support via CC. # 'distlocks' enables distfiles locking using fcntl or hardlinks. This # is enabled by default. Tools exist to help clean the locks # after crashes: /usr/lib/portage/bin/clean_locks. # 'fixpackages' allows portage to fix binary packages that are stored in # PKGDIR. This can consume a lot of time. 'fixpackages' is # also a script that can be run at any given time to force # the same actions. # 'gpg' enables basic verification of Manifest files using gpg. # This features is UNDER DEVELOPMENT and reacts to features # of strict and severe. Heavy use of gpg sigs is coming. # 'keeptemp' prevents the clean phase from deleting the temp files ($T) # from a merge. # 'keepwork' prevents the clean phase from deleting the WORKDIR. # 'maketest' causes ebuilds to perform testing phases if they are capable # of it. Some packages support this automaticaly via makefiles. # 'noauto' causes ebuild to perform only the action requested and # not any other required actions like clean or unpack -- for # debugging purposes only. # 'noclean' prevents portage from removing the source and temporary files # after a merge -- for debugging purposes only. # 'nostrip' prevents the stripping of binaries. # 'notitles' disables xterm titlebar updates (which contain status info). # 'sandbox' enables sandboxing when running emerge and ebuild. # 'strict' causes portage to react strongly to conditions that are # potentially dangerous, like missing/incorrect Manifest files. # 'userpriv' allows portage to drop root privileges while it is compiling, # as a security measure. As a side effect this can remove # sandbox access violations for users. # 'usersandbox' enables sandboxing while portage is running under userpriv. #FEATURES="sandbox buildpkg ccache distcc userpriv usersandbox notitles noclean noauto cvs keeptemp keepwork autoaddcvs" #FEATURES="sandbox ccache distcc distlocks autoaddcvs" # # CCACHE_SIZE sets the space use limitations for ccache. The default size is # 2G, and will be set if not defined otherwise and ccache is in features. # Portage will set the default ccache dir if it is not present in the # user's environment, for userpriv it sets: ${PORTAGE_TMPDIR}/ccache # (/var/tmp/ccache), and for regular use the default is /root/.ccache. # Sizes are specified with 'G' 'M' or 'K'. # '2G' for 2 gigabytes, '2048M' for 2048 megabytes (same as 2G). #CCACHE_SIZE="512M" # # DISTCC_DIR sets the temporary space used by distcc. #DISTCC_DIR="${PORTAGE_TMPDIR}/.distcc" # # RSYNC_EXCLUDEFROM is a file that portage will pass to rsync when it updates # the portage tree. Specific chunks of the tree may be excluded from # consideration. This may cause dependency failures if you are not careful. # The file format is one pattern per line, blanks and ';' or '#' lines are # comments. See 'man rsync' for more details on the exclude-from format. #RSYNC_EXCLUDEFROM=/etc/portage/rsync_excludes # logging related variables: # PORTAGE_ELOG_CLASSES: selects messages to be logged, possible values are: # info, warn, error, log # Warning: commenting this will disable elog PORTAGE_ELOG_CLASSES="warn error log" # PORTAGE_ELOG_SYSTEM: selects the module(s) to process the log messages. Modules # included in portage are (empty means logging is disabled): # save (saves one log per package in $PORTAGE_TMPDIR/elogs) # custom (passes all messages to $PORTAGE_LOG_COMMAND) # syslog (sends all messages to syslog) # mail (send all messages to the mailserver defined # in $PORTAGE_LOG_MAILURI) # To use elog you should enable at least one module #PORTAGE_ELOG_SYSTEM="save mail" # PORTAGE_ELOG_COMMAND: only used with the "custom" logging module. Specifies a command # to process log messages. Two variables are expanded: # ${PACKAGE} - expands to the cpv entry of the processed # package (see $PVR in ebuild(5)) # ${LOGFILE} - absolute path to the logfile # Both variables have to be quoted with single quotes #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'" # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail # module. In most cases listing the recipient adress and # the receiving mailserver should be sufficient, but you can # also use advanced settings like authentication or TLS. The # full syntax is: # adress [[user:passwd@]mailserver[:port]] # where # adress: recipient adress # user: username for smtp auth (defaults to none) # passwd: password for smtp auth (defaults to none) # mailserver: smtp server that should be used to deliver the mail (defaults to localhost) # port: port to use on the given smtp server (defaults to 25, values > 100000 indicate that starttls should be used on (port-100000)) # Examples: #PORTAGE_ELOG_MAILURI="root@localhost localhost" (this is also the default setting) #PORTAGE_ELOG_MAILURI="user@some.domain mail.some.domain" (sends mails to user@some.domain using the mailserver mail.some.domain) #PORTAGE_ELOG_MAILURI="user@some.domain user:secret@mail.some.domain:100465" (this is left uncommented as a reader excercise ;)