1 files changed, 0 insertions, 158 deletions
diff --git a/tools/manpagegen/bcfg2.1.ronn b/tools/manpagegen/bcfg2.1.ronn
deleted file mode 100644
index 8b3ea1e60..000000000
--- a/tools/manpagegen/bcfg2.1.ronn
+++ /dev/null
@@ -1,158 +0,0 @@
-bcfg2(1) -- Bcfg2 client tool
-=============================
-
-## SYNOPSIS
-
-`bcfg2` [_options_][_..._]
-
-## DESCRIPTION
-
-`bcfg2` runs the Bcfg2 configuration process on the current host. This
-process consists of the following steps.
-
-* Fetch and execute probes
-* Upload probe results
-* Fetch the client configuration
-* Check the current client state
-* Attempt to install the desired configuration
-* Upload statistics about the Bcfg2 execution and client state
-
-## OPTIONS
-
-  * `-B`:
-    Configure everything except the given bundle(s).
-
-  * `-C` <configfile>:
-    Specify alternate bcfg2.conf location.
-
-  * `-D` [<driver1>,<driver2>]:
-    Specify a set of Bcfg2 tool drivers.
-  
-    *NOTE: only drivers listed will be loaded. (e.g., if you do not
-    include POSIX, you will be unable to verify/install Path entries).*
-
-  * `-E` <encoding>:
-    Specify the encoding of Cfg files.
-
-  * `-I`:
-    Run bcfg2 in interactive mode. The user will be prompted before
-    each change.
-
-  * `-O`:
-    Omit lock check.
-
-  * `-P`:
-    Run bcfg2 in paranoid mode. Diffs will be logged for configuration
-    files marked as paranoid by the Bcfg2 server.
-
-  * `-R` <retry count>:
-    Specify the number of times that the client will attempt to retry
-    network communication.
-
-  * `-S` <https://server:port>:
-    Manually specify the server location (as opposed to using the value
-    in bcfg2.conf).
-
-  * `-Z`:
-    Do not configure independent entries.
-
-  * `-b` [_bundle1:bundle2_]:
-    Run bcfg2 against one or multiple bundles in the configuration.
-
-  * `-c` <cachefile>:
-    Cache a copy of the configuration in cachefile.
-
-  * `--ca-cert=`<ca cert>:
-    Specifiy the path to the SSL CA certificate.
-
-  * `-d`:
-    Run bcfg2 in debug mode.
-
-  * `-e`:
-    When in verbose mode, display extra entry information (temporary
-    until verbosity rework).
-
-  * `-f` <specification path>:
-    Configure from a file rather than querying the server.
-
-  * `-h`:
-    Print Usage information.
-
-  * `-k`:
-    Run in bulletproof mode. This currently only affects behavior in
-    the debian toolset; it calls apt-get update and clean and dpkg
-    --configure --pending.
-
-  * `-l` <whitelist|blacklist|none>:
-    Run the client in the server decision list mode (unless "none"
-    is specified, which can be done in order to override the decision
-    list mode specified in bcfg2.conf). This approach is needed when
-    particular changes are deemed "high risk". It gives the ability to
-    centrally specify these changes, but only install them on clients
-    when administrator supervision is available. Because collaborative
-    configuration is one of the remaining hard issues in configuration
-    management, these issues typically crop up in environments with
-    several administrators and much configuration variety. (This setting
-    will be ignored if the -f option is also specified).
-
-  * `-n`:
-    Run bcfg2 in dry-run mode. No changes will be made to the system.
-
-  * `-o` <logfile path>:
-    Writes a log to the specified path.
-
-  * `-p` <profile>:
-    Assert a profile for the current client.
-
-  * `-q`:
-    Run bcfg2 in quick mode. Package checksum verification won’t be
-    performed. This mode relaxes the constraints of correctness, and
-    thus should only be used in safe conditions.
-
-  * `-Q`:
-    Run bcfg2 in "bundle quick" mode, where only entries in a bundle are
-    verified or installed. This runs much faster than -q, but doesn’t
-    provide statistics to the server at all. In order for this option to
-    work, the -b option must also be provided. This option is incompatible
-    with -r.
-
-  * `-r` <mode>:
-    Cause bcfg2 to remove extra configuration elements it detects. Mode is
-    one of all, Services, or Packages. All removes all entries. Likewise,
-    Services and Packages remove only the extra configuration elements
-    of the respective type.
-
-  * `-s` <service mode>:
-    Set bcfg2 interaction level for services. Default behavior is to
-    modify all services affected by reconfiguration. build mode attempts
-    to stop all services started. disabled suppresses all attempts to
-    modify services.
-
-  * `--ssl-cert=`<ssl cert>:
-    Specifiy the path to the SSL certificate.
-
-  * `--ssl-cns=`[_CN1:CN2_]:
-    List of acceptable SSL server Common Names.
-
-  * `--ssl-key=`<ssl key>:
-    Specifiy the path to the SSL key.
-
-  * `-u` <user>:
-    Attempt to authenticate as ’user’.
-
-  * `-x` <password>:
-    Use ’password’ for client communication.
-
-  * `-t` <timeout>:
-    Set the timeout (in seconds) for client communication. Default is
-    90 seconds.
-
-  * `-v`:
-    Run bcfg2 in verbose mode.
-
-  * `-z`:
-    Only configure independent entries, ignore bundles.
-
-## SEE ALSO
-
-bcfg2-server(8), bcfg2-info(8)