diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/install/Configuration-Settings.md | 46 | ||||
| -rw-r--r-- | doc/install/LDAP-Setup.md | 34 | ||||
| -rw-r--r-- | doc/install/Production-RHEL6.md | 219 | ||||
| -rw-r--r-- | doc/install/Production-RHEL7.md (renamed from doc/install/Production-RHEL.md) | 64 | ||||
| -rw-r--r-- | doc/install/Production-Ubuntu.md | 4 |
5 files changed, 333 insertions, 34 deletions
diff --git a/doc/install/Configuration-Settings.md b/doc/install/Configuration-Settings.md index 5f9b3b62d..c18012af8 100644 --- a/doc/install/Configuration-Settings.md +++ b/doc/install/Configuration-Settings.md @@ -289,6 +289,52 @@ Enter `https://<your-gitlab-url>/oauth/authorize` (example: `https://example.com ```"UserApiEndpoint": ""``` Enter `https://<your-gitlab-url>/oauth/authorize` (example: `https://example.com:3000/api/v3/user`). Use HTTP or HTTPS depending on how your server is configured. +### LDAP Settings (Enterprise) + +Settings used to enable and configure LDAP authentication with Mattermost. Available in the Enterprise version of Mattermost. + +```"Enable Login With LDAP": "false"``` +When true, Mattermost allows login using LDAP. + +```“LDAP Server”: “”``` +The domain or IP address of the LDAP server. + +```“LDAP Port”: “389”``` +The port Mattermost will use to connect to the LDAP server. Default is 389. + +```”BaseDN”: ””``` +The Base DN is the Distinguished Name of the location where Mattermost should start its search for users in the LDAP tree. + +```”Bind Username”: ””``` +The username used to perform the LDAP search. This should typically be an account created specifically for use with Mattermost. It should be a read only account with access limited to the portion of the LDAP tree specified in the BaseDN field. + +```”Bind Password”: ””``` +Password of the user given in “Bind Username”. + +```”First Name Attribute”: ””``` +The attribute in the LDAP server that will be used to populate the first name of users in Mattermost. + +```”Last Name Attribute”: ””``` +The attribute in the LDAP server that will be used to populate the last name of users in Mattermost. + +```”Email Attribute”: ””``` +The attribute in the LDAP server that will be used to populate the email addresses of users in Mattermost. + +```”Username Attribute”: ””``` +The attribute in the LDAP server that will be used to populate the username field in Mattermost. This may be the same as the ID Attribute. + +```”ID Attribute”: ””``` + +The attribute in the LDAP server that will be used as a unique identifier in Mattermost. + +This is the attribute that will be used to create Mattermost accounts. It should be an LDAP attribute with a value that does not change, such as username or uid. If a user’s Id Attribute changes, it will create a new Mattermost account unassociated with their old one. + +This is also the value used to log in to Mattermost in the “LDAP Username” field on the sign in page. Normally this attribute is the same as the “Username Attribute” field above. If your team typically uses domain\username to sign in to other services with LDAP, you may choose to put domain\username in this field to maintain consistency between sites. + +```”Query Timeout (seconds)”: ”60”``` + +The timeout value for queries to the LDAP server. Increase this value if you are getting timeout errors caused by a slow LDAP server. + ## Config.json Settings Not in System Console System Console allows an IT Admin to update settings defined in `config.json`. However there are a number of settings in `config.json` unavailable in the System Console and require update from the file itself. We describe them here: diff --git a/doc/install/LDAP-Setup.md b/doc/install/LDAP-Setup.md new file mode 100644 index 000000000..a619e645e --- /dev/null +++ b/doc/install/LDAP-Setup.md @@ -0,0 +1,34 @@ +## LDAP Setup + +LDAP authentication is available in the Enterprise version of Mattermost. +### How to enable LDAP + +After installing Mattermost: + +1. Create a team using email authentication + - Note: The first account used to create a team will be the “System Administrator” account, used to configure settings for your Mattermost site + 3. Go to Main Menu (the three dots near your team name in the top left of your screen) > **System Console** + 4. Go to LDAP Settings + 5. Fill in the fields to set up Mattermost authentication with your LDAP server + + After LDAP has been enabled, users should be able to go to your Mattermost site and sign in using their LDAP credentials. The “LDAP username” will be the attribute set in the “Id Attribute” field. + + **Note: In the initial implementation of LDAP, if a user attribute changes on the LDAP server it will be updated the next time the user enters their credentials to log in to Mattermost. This includes if a user is made inactive or removed from an LDAP server. Synchronization with LDAP servers is planned in a future release.** + +### Switching System Administrator account to LDAP authentication + +If you would like to switch your System Administrator account to LDAP authentication, it is recommended you do the following: + +1. Create a new account using LDAP + - Note: If your LDAP credentials use the same email address as your System Administrator account, it is recommended you change the email on your System Administrator account by going to Main Menu -> Account Settings -> General -> Email. This will free up the email address so it can be used by the LDAP account. + 2. Sign in to your email based System Administrator account + 3. Navigate to the System Console + 4. Go to Teams -> Team Name -> Users, and find your new LDAP user account + 5. Promote your LDAP account to “System Administrator” using the dropdown menu beside the username + 6. Log in with your LDAP account + 7. Navigate to the System Console + 8. Go to Teams -> Team Name -> Users, and find your old email based System Administrator account + 9. Make the email account “Inactive” using the dropdown beside the username + + **Note: If you make the email account inactive without promoting another account to System Administrator, you will lose your System Administrator privileges. This can be fixed by promoting another account to System Administrator using the command line.** + diff --git a/doc/install/Production-RHEL6.md b/doc/install/Production-RHEL6.md new file mode 100644 index 000000000..e3c6423c3 --- /dev/null +++ b/doc/install/Production-RHEL6.md @@ -0,0 +1,219 @@ +# Production Installation on Red Hat Enterprise Linux 6.6 + +## Install Red Hat Enterprise Linux (x64) 6.6 +1. Set up 3 machines with RHEL with 2GB of RAM or more. The servers will be used for the Load Balancer, Mattermost (this must be x64 to use pre-built binaries), and Database. + - **Optional:** You can also use a single machine for all 3 components in this install guide, depending on the standards of your data center. +2. Make sure the system is up to date with the most recent security patches. + * ``` sudo yum update``` + * ``` sudo yum upgrade``` + +## Set up Database Server +1. For the purposes of this guide we will assume this server has an IP address of `10.10.10.1` + - **Optional:** if installing on the same machine substitute `10.10.10.1` with `127.0.0.1` +1. Install PostgreSQL 9.4+ (or MySQL 5.6+) + * ``` sudo yum install http://yum.postgresql.org/9.4/redhat/rhel-6-x86_64/pgdg-redhat94-9.4-1.noarch.rpm``` + * ``` sudo yum install postgresql94-server postgresql94-contrib``` + * ``` sudo service postgresql-9.4 initdb``` + * ``` sudo chkconfig postgresql-9.4 on``` + * ``` sudo service postgresql-9.4 start``` +1. PostgreSQL created a user account called `postgres`. You will need to log into that account with: + * ``` sudo -i -u postgres``` +1. You can get a PostgreSQL prompt by typing: + * ``` psql``` +1. Create the Mattermost database by typing: + * ```postgres=# CREATE DATABASE mattermost;``` +1. Create the Mattermost user by typing: + * ```postgres=# CREATE USER mmuser WITH PASSWORD 'mmuser_password';``` +1. Grant the user access to the Mattermost database by typing: + * ```postgres=# GRANT ALL PRIVILEGES ON DATABASE mattermost to mmuser;``` +1. You can exit out of PostgreSQL by typing: + * ```postgres=# \q``` +1. You can exit the Postgres account by typing: + * ``` exit``` +1. Allow Postgres to listen on all assigned IP Addresses: + * ```sudo vi /var/lib/pgsql/9.4/data/postgresql.conf``` + * Uncomment 'listen_addresses' and change 'localhost' to '*' +1. Alter `pg_hba.conf` to allow the Mattermost Server to talk to the Postgres database: + * ```sudo vi /var/lib/pgsql/9.4/data/pg_hba.conf``` + * Add the following line to the 'IPv4 local connections': + * host all all 10.10.10.2/32 md5 +1. Reload Postgres database: + * ```sudo service postgresql-9.4 restart``` +1. Attempt to connect with the new created user to verify everything looks good: + * ```psql --host=10.10.10.1 --dbname=mattermost --username=mmuser --password``` + * ```mattermost=> \q``` + + +## Set up Mattermost Server +1. For the purposes of this guide we will assume this server has an IP address of `10.10.10.2` +1. Download the latest Mattermost Server by typing: + * ``` wget https://github.com/mattermost/platform/releases/download/v1.3.0/mattermost.tar.gz``` +1. Install Mattermost under `/opt` + * Unzip the Mattermost Server by typing: + * ``` tar -xvzf mattermost.tar.gz``` + * ``` sudo mv mattermost /opt``` +1. Create the storage directory for files. We assume you will have attached a large drive for storage of images and files. For this setup we will assume the directory is located at `/opt/mattermost/data`. + * Create the directory by typing: + * ``` sudo mkdir -p /opt/mattermost/data``` +1. Create a system user and group called mattermost that will run this service: + * ``` sudo useradd -r mattermost -U``` + * Set the Mattermost account as the directory owner by typing: + * ``` sudo chown -R mattermost:mattermost /opt/mattermost``` + * ``` sudo chmod -R g+w /opt/mattermost``` + * Add yourself to the mattermost group to ensure you can edit these files: + * ``` sudo usermod -a -G mattermost USERNAME``` +1. Configure Mattermost Server by editing the `config.json` file at `/opt/mattermost/config` + * ``` cd /opt/mattermost/config``` + * Edit the file by typing: + * ``` sudo vi config.json``` + * replace `DriverName": "mysql"` with `DriverName": "postgres"` + * replace `"DataSource": "mmuser:mostest@tcp(dockerhost:3306)/mattermost_test?charset=utf8mb4,utf8"` with `"DataSource": "postgres://mmuser:mmuser_password@10.10.10.1:5432/mattermost?sslmode=disable&connect_timeout=10"` + * Optionally you may continue to edit configuration settings in `config.json` or use the System Console described in a later section to finish the configuration. +1. Test the Mattermost Server + * ``` cd /opt/mattermost/bin``` + * Run the Mattermost Server by typing: + * ``` sudo su mattermost``` + * ``` ./platform``` + * You should see a console log like `Server is listening on :8065` letting you know the service is running. + * Stop the server for now by typing `Ctrl-C` +1. Setup Mattermost to use the Upstart daemon which handles supervision of the Mattermost process. + * ``` sudo touch /etc/init/mattermost.conf``` + * ``` sudo vi /etc/init/mattermost.conf``` + * Copy the following lines into `/etc/init/mattermost.conf` +``` +start on runlevel [2345] +stop on runlevel [016] +respawn +chdir /opt/mattermost +exec bin/platform +``` + * You can manage the process by typing: + * ``` sudo start mattermost``` + * Verify the service is running by typing: + * ``` curl http://10.10.10.2:8065``` + * You should see a page titles *Mattermost - Signup* + * You can also stop the process by running the command ` sudo stop mattermost`, but we will skip this step for now. + +## Set up Nginx Server +1. For the purposes of this guide we will assume this server has an IP address of `10.10.10.3` +1. We use Nginx for proxying request to the Mattermost Server. The main benefits are: + * SSL termination + * HTTP to HTTPS redirect + * Port mapping :80 to :8065 + * Standard request logs +1. Install Nginx on RHEL with + * ``` sudo vi /etc/yum.repos.d/nginx.repo``` + * Copy the below into the file +``` +[nginx] +name=nginx repo +baseurl=http://nginx.org/packages/rhel/6/$basearch/ +gpgcheck=0 +enabled=1 +``` + * ``` sudo yum install nginx.x86_64``` + * ``` sudo service nginx start``` + * ``` sudo chkconfig nginx on``` +1. Verify Nginx is running + * ``` curl http://10.10.10.3``` + * You should see a *Welcome to nginx!* page +1. Map a FQDN (fully qualified domain name) like **mattermost.example.com** to point to the Nginx server. +1. Configure Nginx to proxy connections from the internet to the Mattermost Server + * Create a configuration for Mattermost + * ``` sudo touch /etc/nginx/conf.d/mattermost.conf``` + * Below is a sample configuration with the minimum settings required to configure Mattermost +``` + server { + server_name mattermost.example.com; + location / { + client_max_body_size 50M; + proxy_set_header Upgrade $http_upgrade; + proxy_set_header Connection "upgrade"; + proxy_set_header Host $http_host; + proxy_set_header X-Real-IP $remote_addr; + proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; + proxy_set_header X-Forwarded-Proto $scheme; + proxy_set_header X-Frame-Options SAMEORIGIN; + proxy_pass http://10.10.10.2:8065; + } + } +``` + * Remove the existing file with: + * ``` sudo mv /etc/nginx/conf.d/default.conf /etc/nginx/conf.d/default.conf.bak``` + * Restart Nginx by typing: + * ``` sudo service nginx restart``` + * Verify you can see Mattermost thru the proxy by typing: + * ``` curl http://localhost``` + * You should see a page titles *Mattermost - Signup* + * Not seeing the page? Look for errors with ``` sudo cat /var/log/audit/audit.log | grep nginx | grep denied``` + * **Optional** if you're running on the same server as the Mattermost server and see 502 errors you may need to run `sudo setsebool -P httpd_can_network_connect true` because SELinux is preventing the connection + +## Set up Nginx with SSL (Recommended) +1. You will need a SSL cert from a certificate authority. +1. For simplicity we will generate a test certificate. + * ``` mkdir /top/mattermost/cert``` + * ``` cd /top/mattermost/cert``` + * ``` sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout mattermost.key -out mattermost.crt``` + * Input the following info +``` + Country Name (2 letter code) [AU]:US + State or Province Name (full name) [Some-State]:California + Locality Name (eg, city) []:Palo Alto + Organization Name (eg, company) [Internet Widgits Pty Ltd]:Example LLC + Organizational Unit Name (eg, section) []: + Common Name (e.g. server FQDN or YOUR name) []:mattermost.example.com + Email Address []:admin@mattermost.example.com +``` +1. Modify the file at `/etc/nginx/conf.d/mattermost.conf` and add the following lines + * +``` + server { + listen 80; + server_name mattermost.example.com; + return 301 https://$server_name$request_uri; + } + + server { + listen 443 ssl; + server_name mattermost.example.com; + + ssl on; + ssl_certificate /opt/mattermost/cert/mattermost.crt; + ssl_certificate_key /opt/mattermost/cert/mattermost.key; + ssl_session_timeout 5m; + ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; + ssl_ciphers "HIGH:!aNULL:!MD5 or HIGH:!aNULL:!MD5:!3DES"; + ssl_prefer_server_ciphers on; + ssl_session_cache shared:SSL:10m; + + # add to location / above + location / { + gzip off; + proxy_set_header X-Forwarded-Ssl on; +``` + +## Finish Mattermost Server setup +1. Navigate to `https://mattermost.example.com` and create a team and user. +1. The first user in the system is automatically granted the `system_admin` role, which gives you access to the System Console. +1. From the `town-square` channel click the dropdown and choose the `System Console` option +1. Update Email Settings. We recommend using an email sending service. The example below assumes AmazonSES. + * Set *Send Email Notifications* to true + * Set *Require Email Verification* to true + * Set *Feedback Name* to `No-Reply` + * Set *Feedback Email* to `mattermost@example.com` + * Set *SMTP Username* to `AFIADTOVDKDLGERR` + * Set *SMTP Password* to `DFKJoiweklsjdflkjOIGHLSDFJewiskdjf` + * Set *SMTP Server* to `email-smtp.us-east-1.amazonaws.com` + * Set *SMTP Port* to `465` + * Set *Connection Security* to `TLS` + * Save the Settings +1. Update File Settings: + * Change *Local Directory Location* from `./data/` to `/opt/mattermost/data` +1. Update Log Settings: + * Set *Log to The Console* to `false` +1. Update Rate Limit Settings: + * Set *Vary By Remote Address* to false + * Set *Vary By HTTP Header* to X-Real-IP +1. Feel free to modify other settings +1. Restart the Mattermost Service by typing: + * ``` sudo restart mattermost``` diff --git a/doc/install/Production-RHEL.md b/doc/install/Production-RHEL7.md index a7b34691b..a479ec5ad 100644 --- a/doc/install/Production-RHEL.md +++ b/doc/install/Production-RHEL7.md @@ -1,6 +1,6 @@ -# Production Installation on Red Hat Enterprise Linux 7.1 +# Production Installation on Red Hat Enterprise Linux 7.1+ -## Install Red Hat Enterprise Linux (x64) 7.1 +## Install Red Hat Enterprise Linux (x64) 7.1+ 1. Set up 3 machines with RHEL with 2GB of RAM or more. The servers will be used for the Load Balancer, Mattermost (this must be x64 to use pre-built binaries), and Database. - **Optional:** You can also use a single machine for all 3 components in this install guide, depending on the standards of your data center. 2. Make sure the system is up to date with the most recent security patches. @@ -8,7 +8,7 @@ * ``` sudo yum upgrade``` ## Set up Database Server -1. For the purposes of this guide we will assume this server has an IP address of 10.10.10.1 +1. For the purposes of this guide we will assume this server has an IP address of `10.10.10.1` - **Optional:** if installing on the same machine substitute `10.10.10.1` with `127.0.0.1` 1. Install PostgreSQL 9.4+ (or MySQL 5.6+) * ``` sudo yum install http://yum.postgresql.org/9.4/redhat/rhel-6-x86_64/pgdg-redhat94-9.4-1.noarch.rpm``` @@ -27,42 +27,42 @@ 1. Grant the user access to the Mattermost database by typing: * ```postgres=# GRANT ALL PRIVILEGES ON DATABASE mattermost to mmuser;``` 1. You can exit out of PostgreSQL by typing: - * ```postgre=# \q``` -1. You can exit the postgres account by typing: + * ```postgres=# \q``` +1. You can exit the Postgres account by typing: * ``` exit``` -1. Allow Postgres to listen on all assigned IP Addresses +1. Allow Postgres to listen on all assigned IP Addresses: * ```sudo vi /var/lib/pgsql/9.4/data/postgresql.conf``` * Uncomment 'listen_addresses' and change 'localhost' to '*' -1. Alter pg_hba.conf to allow the mattermost server to talk to the postgres database +1. Alter `pg_hba.conf` to allow the Mattermost Server to talk to the Postgres database: * ```sudo vi /var/lib/pgsql/9.4/data/pg_hba.conf``` - * Add the following line to the 'IPv4 local connections' + * Add the following line to the 'IPv4 local connections': * host all all 10.10.10.2/32 md5 -1. Reload Postgres databasejh +1. Reload Postgres database: * ```sudo systemctl reload postgresql-9.4.service``` -1. Attempt to connect with the new created user to verify everything looks good +1. Attempt to connect with the new created user to verify everything looks good: * ```psql --host=10.10.10.1 --dbname=mattermost --username=mmuser --password``` * ```mattermost=> \q``` ## Set up Mattermost Server -1. For the purposes of this guide we will assume this server has an IP address of 10.10.10.2 +1. For the purposes of this guide we will assume this server has an IP address of `10.10.10.2` 1. Download the latest Mattermost Server by typing: * ``` wget https://github.com/mattermost/platform/releases/download/v1.3.0/mattermost.tar.gz``` -1. Install Mattermost under /opt +1. Install Mattermost under `/opt` * Unzip the Mattermost Server by typing: * ``` tar -xvzf mattermost.tar.gz``` * ``` sudo mv mattermost /opt``` 1. Create the storage directory for files. We assume you will have attached a large drive for storage of images and files. For this setup we will assume the directory is located at `/opt/mattermost/data`. * Create the directory by typing: * ``` sudo mkdir -p /opt/mattermost/data``` -1. Create a system user and group called mattermost that will run this service +1. Create a system user and group called mattermost that will run this service: * ``` sudo useradd -r mattermost -U``` - * Set the mattermost account as the directory owner by typing: + * Set the Mattermost account as the directory owner by typing: * ``` sudo chown -R mattermost:mattermost /opt/mattermost``` * ``` sudo chmod -R g+w /opt/mattermost``` * Add yourself to the mattermost group to ensure you can edit these files: * ``` sudo usermod -aG mattermost USERNAME``` -1. Configure Mattermost Server by editing the config.json file at /opt/mattermost/config +1. Configure Mattermost Server by editing the `config.json` file at `/opt/mattermost/config` * ``` cd /opt/mattermost/config``` * Edit the file by typing: * ``` sudo vi config.json``` @@ -74,12 +74,11 @@ * Run the Mattermost Server by typing: * ``` ./platform``` * You should see a console log like `Server is listening on :8065` letting you know the service is running. - * Stop the server for now by typing `ctrl-c` -1. Setup Mattermost to use the systemd init daemon which handles supervision of the Mattermost process + * Stop the server for now by typing `Ctrl-C` +1. Set up Mattermost to use the systemd init daemon which handles supervision of the Mattermost process: * ``` sudo touch /etc/systemd/system/mattermost.service``` * ``` sudo vi /etc/systemd/system/mattermost.service``` * Copy the following lines into `/etc/systemd/system/mattermost.service` - * ``` [Unit] Description=Mattermost @@ -93,18 +92,20 @@ ExecStart=/opt/mattermost/bin/platform PIDFile=/var/spool/mattermost/pid/master.pid [Install] -WantedBy=default.target +WantedBy=multi-user.target ``` * Make sure the service is executable with ``` sudo chmod 664 /etc/systemd/system/mattermost.service``` * Reload the services with `sudo systemctl daemon-reload` - * Start mattermost service with `sudo systemctl start mattermost.service` + * Start Mattermost service with `sudo systemctl start mattermost.service` + * `sudo chkconfig mattermost on` + * Start server on reboot `sudo systemctl enable mattermost.service` ## Set up Nginx Server -1. For the purposes of this guide we will assume this server has an IP address of 10.10.10.3 +1. For the purposes of this guide we will assume this server has an IP address of `10.10.10.3` 1. We use Nginx for proxying request to the Mattermost Server. The main benefits are: * SSL termination - * http to https redirect + * HTTP to HTTPS redirect * Port mapping :80 to :8065 * Standard request logs 1. Install Nginx on RHEL with @@ -144,15 +145,15 @@ enabled=1 } } ``` - * Remove the existing file with + * Remove the existing file with: * ``` sudo mv /etc/nginx/conf.d/default.conf /etc/nginx/conf.d/default.conf.bak``` * Restart Nginx by typing: * ``` sudo service nginx restart``` * Verify you can see Mattermost thru the proxy by typing: * ``` curl http://localhost``` * You should see a page titles *Mattermost - Signup* - * Not seeing the page? look for errors with ``` sudo cat /var/log/audit/audit.log | grep nginx | grep denied``` - * **Optional** if you're running on the same server as the Mattermost server and see 502 errors you may need to run `setsebool -P httpd_can_network_connect true` because SELinux is preventing the connection + * Not seeing the page? Look for errors with ``` sudo cat /var/log/audit/audit.log | grep nginx | grep denied``` + * **Optional** if you're running on the same server as the Mattermost server and see 502 errors you may need to run `sudo setsebool -P httpd_can_network_connect true` because SELinux is preventing the connection ## Set up Nginx with SSL (Recommended) 1. You will need a SSL cert from a certificate authority. @@ -198,9 +199,8 @@ enabled=1 proxy_set_header X-Forwarded-Ssl on; ``` - ## Finish Mattermost Server setup -1. Navigate to https://mattermost.example.com and create a team and user. +1. Navigate to `https://mattermost.example.com` and create a team and user. 1. The first user in the system is automatically granted the `system_admin` role, which gives you access to the System Console. 1. From the `town-square` channel click the dropdown and choose the `System Console` option 1. Update Email Settings. We recommend using an email sending service. The example below assumes AmazonSES. @@ -214,13 +214,13 @@ enabled=1 * Set *SMTP Port* to `465` * Set *Connection Security* to `TLS` * Save the Settings -1. Update File Settings +1. Update File Settings: * Change *Local Directory Location* from `./data/` to `/opt/mattermost/data` -1. Update Log Settings. - * Set *Log to The Console* to false -1. Update Rate Limit Settings. +1. Update Log Settings: + * Set *Log to The Console* to `false` +1. Update Rate Limit Settings: * Set *Vary By Remote Address* to false * Set *Vary By HTTP Header* to X-Real-IP -1. Feel free to modify other settings. +1. Feel free to modify other settings 1. Restart the Mattermost Service by typing: * ``` sudo restart mattermost``` diff --git a/doc/install/Production-Ubuntu.md b/doc/install/Production-Ubuntu.md index 5af5fd7c0..da3487f45 100644 --- a/doc/install/Production-Ubuntu.md +++ b/doc/install/Production-Ubuntu.md @@ -44,7 +44,7 @@ 1. For the sake of making this guide simple we located the files at `/home/ubuntu/mattermost`. In the future we will give guidance for storing under `/opt`. 1. We have also elected to run the Mattermost Server as the `ubuntu` account for simplicity. We recommend setting up and running the service under a `mattermost` user account with limited permissions. 1. Download the latest Mattermost Server by typing: - * ``` wget https://github.com/mattermost/platform/releases/download/v1.2.1/mattermost.tar.gz``` + * ``` wget https://github.com/mattermost/platform/releases/download/v1.3.0/mattermost.tar.gz``` 1. Unzip the Mattermost Server by typing: * ``` tar -xvzf mattermost.tar.gz``` 1. Create the storage directory for files. We assume you will have attached a large drive for storage of images and files. For this setup we will assume the directory is located at `/mattermost/data`. @@ -65,7 +65,7 @@ * ``` ./platform``` * You should see a console log like `Server is listening on :8065` letting you know the service is running. * Stop the server for now by typing `ctrl-c` -1. Setup Mattermost to use the Ubuntu Upstart daemon which handles supervision of the Mattermost process. +1. Setup Mattermost to use the Upstart daemon which handles supervision of the Mattermost process. * ``` sudo touch /etc/init/mattermost.conf``` * ``` sudo vi /etc/init/mattermost.conf``` * Copy the following lines into `/etc/init/mattermost.conf` |