From 1e5c432e1029601a664454388ae366ef69618d62 Mon Sep 17 00:00:00 2001
From: Christopher Speller <crspeller@gmail.com>
Date: Mon, 25 Jun 2018 12:33:13 -0700
Subject: MM-10702 Moving plugins to use hashicorp go-plugin. (#8978)

* Moving plugins to use hashicorp go-plugin.

* Tweaks from feedback.
---
 .../grpc/transport/bdp_estimator.go                | 140 +++++++++++++++++++++
 1 file changed, 140 insertions(+)
 create mode 100644 vendor/google.golang.org/grpc/transport/bdp_estimator.go

(limited to 'vendor/google.golang.org/grpc/transport/bdp_estimator.go')

diff --git a/vendor/google.golang.org/grpc/transport/bdp_estimator.go b/vendor/google.golang.org/grpc/transport/bdp_estimator.go
new file mode 100644
index 000000000..63cd2627c
--- /dev/null
+++ b/vendor/google.golang.org/grpc/transport/bdp_estimator.go
@@ -0,0 +1,140 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+	"sync"
+	"time"
+)
+
+const (
+	// bdpLimit is the maximum value the flow control windows
+	// will be increased to.
+	bdpLimit = (1 << 20) * 4
+	// alpha is a constant factor used to keep a moving average
+	// of RTTs.
+	alpha = 0.9
+	// If the current bdp sample is greater than or equal to
+	// our beta * our estimated bdp and the current bandwidth
+	// sample is the maximum bandwidth observed so far, we
+	// increase our bbp estimate by a factor of gamma.
+	beta = 0.66
+	// To put our bdp to be smaller than or equal to twice the real BDP,
+	// we should multiply our current sample with 4/3, however to round things out
+	// we use 2 as the multiplication factor.
+	gamma = 2
+)
+
+// Adding arbitrary data to ping so that its ack can be identified.
+// Easter-egg: what does the ping message say?
+var bdpPing = &ping{data: [8]byte{2, 4, 16, 16, 9, 14, 7, 7}}
+
+type bdpEstimator struct {
+	// sentAt is the time when the ping was sent.
+	sentAt time.Time
+
+	mu sync.Mutex
+	// bdp is the current bdp estimate.
+	bdp uint32
+	// sample is the number of bytes received in one measurement cycle.
+	sample uint32
+	// bwMax is the maximum bandwidth noted so far (bytes/sec).
+	bwMax float64
+	// bool to keep track of the beginning of a new measurement cycle.
+	isSent bool
+	// Callback to update the window sizes.
+	updateFlowControl func(n uint32)
+	// sampleCount is the number of samples taken so far.
+	sampleCount uint64
+	// round trip time (seconds)
+	rtt float64
+}
+
+// timesnap registers the time bdp ping was sent out so that
+// network rtt can be calculated when its ack is received.
+// It is called (by controller) when the bdpPing is
+// being written on the wire.
+func (b *bdpEstimator) timesnap(d [8]byte) {
+	if bdpPing.data != d {
+		return
+	}
+	b.sentAt = time.Now()
+}
+
+// add adds bytes to the current sample for calculating bdp.
+// It returns true only if a ping must be sent. This can be used
+// by the caller (handleData) to make decision about batching
+// a window update with it.
+func (b *bdpEstimator) add(n uint32) bool {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	if b.bdp == bdpLimit {
+		return false
+	}
+	if !b.isSent {
+		b.isSent = true
+		b.sample = n
+		b.sentAt = time.Time{}
+		b.sampleCount++
+		return true
+	}
+	b.sample += n
+	return false
+}
+
+// calculate is called when an ack for a bdp ping is received.
+// Here we calculate the current bdp and bandwidth sample and
+// decide if the flow control windows should go up.
+func (b *bdpEstimator) calculate(d [8]byte) {
+	// Check if the ping acked for was the bdp ping.
+	if bdpPing.data != d {
+		return
+	}
+	b.mu.Lock()
+	rttSample := time.Since(b.sentAt).Seconds()
+	if b.sampleCount < 10 {
+		// Bootstrap rtt with an average of first 10 rtt samples.
+		b.rtt += (rttSample - b.rtt) / float64(b.sampleCount)
+	} else {
+		// Heed to the recent past more.
+		b.rtt += (rttSample - b.rtt) * float64(alpha)
+	}
+	b.isSent = false
+	// The number of bytes accumulated so far in the sample is smaller
+	// than or equal to 1.5 times the real BDP on a saturated connection.
+	bwCurrent := float64(b.sample) / (b.rtt * float64(1.5))
+	if bwCurrent > b.bwMax {
+		b.bwMax = bwCurrent
+	}
+	// If the current sample (which is smaller than or equal to the 1.5 times the real BDP) is
+	// greater than or equal to 2/3rd our perceived bdp AND this is the maximum bandwidth seen so far, we
+	// should update our perception of the network BDP.
+	if float64(b.sample) >= beta*float64(b.bdp) && bwCurrent == b.bwMax && b.bdp != bdpLimit {
+		sampleFloat := float64(b.sample)
+		b.bdp = uint32(gamma * sampleFloat)
+		if b.bdp > bdpLimit {
+			b.bdp = bdpLimit
+		}
+		bdp := b.bdp
+		b.mu.Unlock()
+		b.updateFlowControl(bdp)
+		return
+	}
+	b.mu.Unlock()
+}
-- 
cgit v1.2.3-1-g7c22